Signal outputs
In addition to the telegraphed outputs there are a number of signal outputs representing a variety of processing stages
Headstage signal
- The voltage or current output from the headstage, at x1 gain. This includes
the pre-filter and effects of any leakage current compensation in voltage
clamp mode.
- The same signal, after amplification by the gain stage.
- The output from the four or eight pole output filter (Final signal output).
- An additional output from the gain stage, filtered at 25KHz for general
monitoring purposes.
Cell capacitance signal
Two capacitance outputs are available, the linear calibrated cell capacitance signal together with the imaginary component of the lock-in amplifier output.
Series resistance signal
Similarly to the cell capacitance output, there are two resistance outputs
available. These are the linear calibrated series resistance and the real
component of the lock-in amplifier output.
